Make a Yard Swing Using a Car Tyre

Difficulty: Medium

Learn how to upcycle an old car tyre into a fun and safe yard swing that the whole family can enjoy. This project involves basic cleaning, painting, and using simple tools to create an outdoor play accessory.

Materials Needed

Car tyre	Buy
Strong, weatherproof rope	Buy
Eye bolts	Buy
Nuts	Buy
Washers	Buy
Spray paint (optional)	Buy

Tools Needed

Scrubbing brush	Buy
Soap	Buy
Water	Buy
Drill	Buy
Paintbrush (optional)	Buy
Carabiners	Buy

Steps

Clean the Tyre
Thoroughly clean the tyre using soap, water, and a scrubbing brush. Remove all dirt and debris to ensure a smooth surface.
Drill Drainage Holes
Drill small drainage holes around the bottom of the tyre to prevent water accumulation. This can help avoid potential mosquito breeding grounds.
Paint the Tyre (Optional)
If desired, paint the tyre with rubber-friendly paint. Allow it to dry completely before moving on to the next step.
Attach the Eye Bolts
Drill holes through the tyre at three equidistant points around the top edge. Insert eye bolts through these holes, securing them tightly with nuts and washers.
Secure the Rope
Cut three equal lengths of strong, weatherproof rope. Tie one end of each rope through each of the eye bolts, ensuring the knots are secure.
Hang the Swing
Find a sturdy tree branch. Use one or multiple carabiners to attach the free ends of the ropes to the branch, ensuring even distribution and balance.
Test the Swing
Before use, test the swing for stability and security. Make any necessary adjustments to ensure it is safely installed.

Make a Yard Swing Using a Car Tyre

Materials Needed

Tools Needed

Steps

Recycling Categories

Consumer Goods

Electronics

Organic Waste

Industrial Items