Craft an Ottoman from an Old Car Tyre

Difficulty: Medium

Transform an old car tyre into a stylish and functional ottoman with this detailed DIY guide. This eco-friendly project upcycles a worn-out car tyre into a chic piece of furniture, perfect for any home.

Materials Needed

Old car tyre	Buy
Two plywood circles	Buy
Sisal rope	Buy
Spray adhesive	Buy
Foam cushion	Buy
Upholstery fabric	Buy
Screws	Buy

Tools Needed

Power drill	Buy
Screwdriver	Buy
Jigsaw (or handsaw)	Buy
Hot glue gun	Buy
Staple gun	Buy
Scissors	Buy

Steps

Prepare the Tyre
Begin by thoroughly cleaning the tyre with soap and water. Dry it completely before proceeding to remove any remaining debris or oils.
Cut the Plywood
Cut two circles from the plywood, each matching the diameter of the tyre. These will form the top and bottom bases of the ottoman.
Attach the Plywood
Secure one plywood circle to each side of the tyre using screws and a power drill. Make sure the screws go through the tyre rubber and into the plywood to ensure stability.
Wrap with Sisal Rope
Using the hot glue gun, start from the center of one side and wrap the sisal rope around the tyre, applying glue as you go. Continue wrapping until the entire tyre is covered.
Prepare the Cushion
Cut foam to fit the top of the ottoman. Adhere the foam to the plywood circle using spray adhesive.
Upholster the Top
Cut your fabric large enough to cover the foam and plywood with some excess to staple underneath. Pull the fabric tight and staple it to the underside of the plywood.
Add Finishing Touches
Inspect the ottoman for any loose ends or areas needing additional glue. If desired, attach decorative elements or feet to the bottom.

Craft an Ottoman from an Old Car Tyre

Materials Needed

Tools Needed

Steps

Recycling Categories

Consumer Goods

Electronics

Organic Waste

Industrial Items