Build a Tree Swing from a Car Tyre

Difficulty: Medium

This guide provides step-by-step instructions on how to upcycle a car tyre into a fun and safe tree swing. The process involves selecting a suitable tyre, preparing it for use, cutting and tying the rope, and securely attaching it to a sturdy tree branch.

Materials Needed

Car tyre	Buy
Nylon or polyester rope	Buy
Paint (optional)	Buy

Tools Needed

Power drill	Buy
Utility knife	Buy
Measuring tape	Buy
Ladder	Buy
Protective gloves	Buy

Steps

Select and Prepare the Tyre
Choose a suitable car tyre, ensuring it is clean and free of debris. You may want to paint the tyre for aesthetic purposes and to protect it against the elements.
Drill Holes
Drill drainage holes at the bottom of the tyre to prevent water accumulation.
Cut Rope
Determine the length of the rope needed, factoring in the height of the tree branch and the desired height of the swing. Cut two pieces of rope of equal length.
Tie Knots
Thread the ropes through the holes drilled in the tyre. Tie secure knots at the bottom end of the rope to hold the tyre in place.
Attach to Tree Branch
Toss the ropes over the sturdy tree branch and tie secure knots or use suitable hardware like carabiners to attach the rope to the branch.
Test the Swing
Carefully test the swing to ensure it is secure and safe to use before allowing children to play on it.

Build a Tree Swing from a Car Tyre

Materials Needed

Tools Needed

Steps

Recycling Categories

Consumer Goods

Electronics

Organic Waste

Industrial Items